| Item | Specifications |
||
| Engine type | SKYACTIV-G 2.5 |
||
| Clutch control | Hydraulic |
||
| Clutch pedal | Type | Suspended |
|
| Pedal ratio | 4.7 |
||
| Full stroke (reference value) | (mm {in}) | 141 {5.55} |
|
| Clutch master cylinder inner diameter | (mm {in}) | 15.87 {0.6248} |
|
| Clutch release cylinder inner diameter | (mm {in}) | 20.64 {0.8126} |
|
| Clutch cover | Spring type | Diaphragm |
|
| Set load | (N {kgf, lbf}) | 7000 {713.8, 1574} |
|
| Clutch disc | Outer diameter | (mm {in}) | 239 {9.41} |
| Inner diameter | (mm {in}) | 155 {6.10} |
|
| Clutch fluid type | SAE J1703 or FMVSS116 DOT-3 |
||
| Item | Specifications |
||
| Engine type | SKYACTIV-G 2.5 |
||
| Transaxle control | Floor-shift |
||
| Operation system | Cable |
||
| Shift assist | Forward | Synchromesh |
|
| Reverse | Synchromesh |
||
| Gear ratio | 1GR | 3.700 |
|
| 2GR | 1.947 |
||
| 3GR | 1.300 |
||
| 4GR | 1.029 |
||
| 5GR | 0.837 |
||
| 6GR | 0.680 |
||
| Reverse | 3.724 |
||
| Final gear ratio | 4.105 |
||
| Manual transaxle oil | Grade | API service GL-4 |
|
| Viscosity | All season | SAE 75W-80 |
|
| Capacity (approx. quantity) | (L {US qt, Imp qt}) | 1.65 {1.74, 1.45} |
|
| Item | Specifications |
||
| Engine type | SKYACTIV-G 2.5 |
||
| Gear ratio | 1GR | 3.552 |
|
| 2GR | 2.022 |
||
| 3GR | 1.452 |
||
| 4GR | 1.000 |
||
| 5GR | 0.708 |
||
| 6GR | 0.599 |
||
| Reverse | 3.893 |
||
| Final gear ratio | with i-ELOOP : 3.591 without i-ELOOP : 3.812 |
||
| ATF | Type | ATF FZ |
|
| Capacity (Approx. quantity) | (L {US qt, lmp qt}) | 7.8 {8.2, 6.9} |
|
| Torque converter stall torque ratio | 1.74 |
||
| Hydraulic system (Number of drive/driven gear plates) | Low clutch | 5/5 |
|
| High clutch | 5/5 |
||
| Low and reverse brake | 4/4 |
||
| 2-6 brake | 4/4 |
||
| R-3-5 brake | 3/3 |
||
| Front planetary gear (Number of teeth) | Front sun gear | 38 |
|
| Front pinion gear | 29 |
||
| Front internal gear | 97 |
||
| Rear planetary gear (Number of teeth) | Rear sun gear | 40 |
|
| Rear pinion gear | 27 |
||
| Rear internal gear | 95 |
||
| Reduction planetary gear (Number of teeth) | Reduction sun gear | 68 |
|
| Reduction pinion gear | 21 |
||
| Reduction internal gear | 109 |
||
| Primary gear (number of teeth) | 56 |
||
| Secondary gear (number of teeth) | 59 |
||
| Output gear (number of teeth) | with i-ELOOP : 22 without i-ELOOP : 21 |
||
| Ring gear (number of teeth) | with i-ELOOP : 75 without i-ELOOP : 76 |
||